Specifications

• Technical

  ---

  Part Number(s)

  351077-000

  Technology

  accutouch

  Number of Touches

  1

  Input Methods

  Finger
  Gloved hand
  Passive stylus

  Dimensions

  2.36" x 3.30" x 0.40" / 59.94 mm x 83.82 mm x 10.16 mm

  Interface

  EIA 232E (Serial RS-232), DCE configuration. 8 Data Bits, 1 Stop Bit, No Parity, Full Duplex
  Hardware handshaking: RTS/CTS
  DSR is pulled HIGH (>+3V) by the 2500S when connected and powered. DTR can be asserted by the host to interrupt the flow of data

  Surface Treatment

  clear

  Resolution

  4096x4096, size independent, 255 levels of Z (pressure)

  Conversion Time

  Approximately 10.4 ms per coordinate set

  Power Input

  +4.75 to +5.25 VDC

  Baud Rate

  9600 (default) and 19200

  Reliability

  MTBF greater than 300,000 hours per MIL-HDBK-217-F2 using the parts stress calculation method for ground benign environment with an ambient temperature of 25°C

  Construction

  Four-layer surface-mount design with internal ground plane for EMI suppression

  Flammability

  The printed circuit board substrate is rated 94V0. All plastic components, such as headers and connectors, are also rated 94V0.

  Shock and Vibration

  Three axis sine wave, 50 Hz to 2kHz, 1 G, 2 minutes/Octave with dwell on resonances

  ESD

  Per EN 6100-4-2 1995: Level 4. Contact discharge 8kV, air discharge 15kV.

  Operating Temperature

  0°C to 65°C

  Storage Temperature

  -25°C to 85°C

  Humidity

  Operating: 10% to 90% RH, noncondensing
  Storage: 10% to 90% RH, noncondensing

  Altitude

  10,000 feet

  MTBF

  50,000 hours demonstrated

  Mounting Options

  All mounting holes are plated through for chassis ground connection. Refer to the drawings at the end of this document.

  Connectors and Pin Definitions

  The connector configuration permits the controller to be placed in-line between the touchscreen and serial I/O attachments.

  Controller Cables

  Contact Elo for more information.

  Optional Software/Hardware Handshaking

  RTS/CTS